Skip to main content

Genuine Oregon Mower Blade, 18-15/16"""" rpls John Deere M143520 90-354

Oregon

MSRP: $13.86
$8.08
(You save $5.78 )
(No reviews yet) Write a Review
SKU:
OEP~90-354
UPC:
032488903542
Adding to cartā€¦ The item has been added

Details

  • Requires 3 blades for 54" cut
  • Stays sharp and durable
  • Outstanding bagging and discharge efficiency
  • Major brand replacement: John Deere
  • Fits Models: 2210, 4010, 4110, 4115, 4210, 4310, 4410, 4510, 4610, 4710, GT225, GT235, GT235E, GT245, GX255, GX325, GX335, GT345, GX355, LX255, LX266, LX277, LX279, LX280, LX288, X series, Z425, Z445

Blades

Blade Width Measure near the center of the blade.2.75"
Blade Thickness Measure near the center of the blade.0.250"
Blade Length Measured diagonally from the corners of the blade18-15/16"
Center Hole Size Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTDĀ® built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut13/16"
OffSet (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table1/2"
Air Lift Air lift is the distance the lift panel rises above the cutting edge.1-3/8"

General

ColorBlack
Volume397.442 in3
Product UOMEach
Weight (with Packaging)3.4 Lb
Product Height0.25
Product Length18-15/16"
Product Width2.75
Packaged Length2.75"
Packaged Width18.95"
Packaged Height1.4"

Click these tabs for additional compatibility information.

Replaces

John Deere:

M143520, M145516, M152726

Laser:

91743

Mowmore:

JD0292

Rotary:

10292

Stens:

330-489, 330-742

Sunbelt:

B1JD1052

Compatible Models

John Deere:

10373, 10463, 10464, 11842, 11843, 11844, 11845, 11846, 11847, 11848, 11849, 11850, 12400, 12590, 2210, 2725, 2863, 4010, 4110, 4115, 4210, 4310, 4410, 4510, 4610, 4710, 9076, 9077, 9078, 9079, 9146, 9329, 9331, 9426, 9521, 9523, 9524, 9525, 9526, 9527, 9594, 9595, GT225, GT235, GT235E, GT245, GT345, GX255, GX325, GX335, GX355, LX255, LX266, LX277, LX279, LX280, LX288, X Series, Z425, Z445