Genuine Oregon Gator G3 Blade, 15"""" rpls BRIGGS 7079215 96-343


MSRP: $22.58
(You save $9.86 )
(No reviews yet) Write a Review
Adding to cart… The item has been added


  • Center hole: 1/2"
  • X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution
  • Aggressive blade angle increases air flow to push debris up and out for superior bagging or side discharge
  • Gator Mulcher® provides cleaner, more efficient cutting performance can eliminate the need to bag, saving time and hassle.
  • Replaces major brands: Woods, Snapper, Country Clipper, and Grasshopper


Blade Width Measure near the center of the blade.2.50"
Blade Thickness Measure near the center of the blade.0.203"
Blade Length Measured diagonally from the corners of the blade15"
Center Hole Size Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD® built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut1/2"
OffSet (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table5/16"
Air Lift Air lift is the distance the lift panel rises above the cutting edge.1"
Gator Blade SeriesGator® G3™


Volume48.588 in3
Product UOMEach
Weight (with Packaging)1.91 Lb
Product Height0.203
Product Length15"
Product Width2.5
Packaged Length14.95"
Packaged Width2.5"
Packaged Height1.3"

Click these tabs for additional compatibility information.


Country Clipper:

H-1665, H-1715, H-2013, H1665, H1715, H2013


320231, 320233, 320234, 320235, 320320






7079215, 7079221, 7079221BM, 7079221YP, 79215, 79221




70014, 70062KT, 7014KT, 72896KT

Compatible Models

Country Clipper: