Skip to main content

Genuine Oregon Gator G3 Blade, 21-11/16"""" rpls TORO 107-0241-03 96-708

Oregon

MSRP: $28.68
$15.92
(You save $12.76 )
(No reviews yet) Write a Review
SKU:
OEP~96-708
UPC:
032488967087
Adding to cart… The item has been added

Details

  • Center hole: 1/2"
  • Aggressive blade angle increases air flow to push debris up and out for superior bagging or side discharge
  • Cleaner, more efficient cutting performance can reduce bagging needs
  • Gator Mulcher® provides cleaner, more efficient cutting performance can eliminate the need to bag, saving time and hassle
  • Replacement for major brand: Toro

Blades

Blade Width Measure near the center of the blade.2.50"
Blade Thickness Measure near the center of the blade.0.250"
Blade Length Measured diagonally from the corners of the blade21-11/16"
Center Hole Size Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD® built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut1/2"
OffSet (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table1/2"
Air Lift Air lift is the distance the lift panel rises above the cutting edge.1"
Gator Blade SeriesGator® G3™

General

ColorBlack
Volume74.002 in3
Product UOMEach
Weight (with Packaging)3.88 Lb
Product Height0.25
Product Length21-11/16"
Product Width2.5
Packaged Length21.654"
Packaged Width2.48"
Packaged Height1.378"

Click these tabs for additional compatibility information.

Replaces

Stens:

302-686

Toro:

107-0241-03, 110-6115-03, 92-5608, 92-5608-03

Compatible Models

Toro:

30457, 30465