Description

Details

Center hole: 5/8"
Tungsten carbide is “fused” into the blade – creating an ultra-hard layer at the cutting edge and increasing the time between sharpening
X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution
Gator Mulcher® provides cleaner, more efficient cutting performance can eliminate the need to bag, saving time and hassle
The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge
Replacement for major brand: Exmark

Blades

Blade Width Measure near the center of the blade.	3.00"
Blade Thickness Measure near the center of the blade.	0.203"
Blade Length Measured diagonally from the corners of the blade	20-1/2"
Center Hole Size Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD® built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut	5/8"
OffSet (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table	0
Air Lift Air lift is the distance the lift panel rises above the cutting edge.	1"
Gator Blade Series	Gator® G5™

General

Color	Black
Volume	379.393 in3
Product UOM	Each
Weight (with Packaging)	3.264 Lb
Product Height	0.203
Product Length	20-1/2"
Product Width	3
Packaged Length	22.8"
Packaged Width	6.4"
Packaged Height	2.6"

Replaces

Bunton-Goodall:

PL7441

Dixie Chopper:

30227-60, 30227-60E, 30227-60H, 30227-60T, 30227-60V, 30227-60X, A30227-60N

Dixon:

12421, 12451, 12508, 13368, 13869, 13870, 13921, 13922, 13956, 13957, 13958, 13960, 539119871, 9383

Exmark:

1-613111, 1-613112, 1-633483, 103-0301, 103-0301-B, 103-0301-M, 103-0301-S, 103-1580, 103-1580-B, 103-1580-M, 103-1580-S, 103-2510, 103-2510-S, 103-2530, 103-2530-B, 103-2530-M, 103-2530-S, 613111, 633483

Gravely:

025124, 046999, 08979600, 8979651

Hustler:

600901, 602771, 602771X, 603992, 603992X, 793794, 793794X, 793794Y, 793935, 793935X, 794214, 794214X, 794230, 794230X, 794230Y, 794685, 794685X

Jacobsen:

30227-60X

Stens:

303-120, 303-324

Toro:

105-7715, 105-7715-03, 105-7716, 105-7716-03, 105-7718, 105-7718-03, 105-7777, 105-7777-03, 105-8777, 105-8777-03, 106-8777, 108-1114, 108-1115, 108-1123, 108-1128, 110-0405, 112947, 125-9329-01