Genuine Oregon Mower Blade, 16 1/2in. Part# 92-737

Genuine Oregon Mower Blade, 16 1/2in. Part# 92-737

Oregon

$11.81
(No reviews yet) Write a Review
SKU:
OEP~92-737
UPC:
5400182955061
Adding to cart… The item has been added

Details

  • Center hole: 5/8"
  • Requires 3 blades for 48" cut
  • Tungsten carbide is “fused” into the blade – creating an ultra-hard layer at the cutting edge and increasing the time between sharpening
  • X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution
  • The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge
  • See fit guide for major brand replacements

Blades

Blade Width Measure near the center of the blade.2.50"
Blade Thickness Measure near the center of the blade.0.203"
Blade Length Measured diagonally from the corners of the blade16-1/2"
Center Hole Size Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD® built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut5/8"
OffSet (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table0
Air Lift Air lift is the distance the lift panel rises above the cutting edge.1-1/16"

General

ColorBlack
Volume46.002 in3
Product UOMEach
Weight (with Packaging)2.21 Lb
Product Height0.203
Product Length16-1/2"
Product Width2.5
Packaged Length16.4"
Packaged Width2.55"
Packaged Height1.1"

Click these tabs for additional compatibility information.

Replaces

DR:

152871

Dixon:

11645, 539100340

Gravely:

GDU10230

Hustler:

601014, 601014X, 601123, 601123X, 601123Y, 795757, 795757X, 795757Y, 796623, 796623X, 796623Y, 796631, 796631X, 796631Y, 796649, 796649X, 796649Y

John Deere:

AM104489, M73509, PT11136, TCU29299, TCU35392, TCU37209

Land Pride:

839-157C, 839-270C

Snapper:

17043, 7017043, 7017043YP, 7075771, 7075771BMA, 7075771BZ, 7075771BZYP

Wright Stander:

71440002, 71490001

Compatible Models

DR:

Versa Pro Z

Dixon:

Fas Trak, Sport, X-One

Hustler:

927426, 928374, 928374CA, 929240, 929240CA, 929331, 929406, 929570CE, 929588CE, 929653, 929679, 929778, 929828, 929836, 930107, 930115, 930123, 930123US, 930130US, 930131CE, 930149, 930149CE, 930149US, 930156US, 930164, 930164US, 930172US, 930198, 930206, 930206US, 930214, 930222, 930222US, 930230, 930388, 930388CE, 930388US, 930396, 930396CE, 930396US, 930404, 930412, 930503, 930503US, 930511, 930522, 930529, 930529US, 930537, 930537US, 930545, 930560, 930578, 930586, 930594, 930636, 930644CE, 930651, 930784, 930834, 930883, 930891, 931006, 931055, 931055US, 931303, 931311, 931329, 931600CE, 931618CE, 931626CE, 931774, 931782, 932194, 932202, 932210, 932228, 932236, 932244, 932251, 932269, FasTrak, Sport, X-One

Snapper:

PMA480

Wright Stander:

Sentar Sport, Sentar2, Sentar3, Stander