Skip to main content

Genuine Oregon Mower Blade, 16-9/16"""" rpls Kubota K5182-71840 92-047

Oregon

MSRP: $19.04
$11.34
(You save $7.70 )
(No reviews yet) Write a Review
SKU:
OEP~92-047
UPC:
032488920471
Adding to cart… The item has been added

Details

  • Center hole: 11/16"
  • Enhanced mulching for bagging and discharge efficiency
  • Stays sharp and durable
  • Fits with Kubota Models: ZG2048

Blades

Blade Width Measure near the center of the blade.2.50"
Blade Thickness Measure near the center of the blade.0.250"
Blade Length Measured diagonally from the corners of the blade16-9/16"
Center Hole Size Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD® built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut11/16"
OffSet (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table1/2"
Air Lift Air lift is the distance the lift panel rises above the cutting edge.1-1/8"

General

ColorBlack
Volume339.649 in3
Product UOMEach
Weight (with Packaging)2.727 Lb
Product Height0.25
Product Length16-9/16"
Product Width2.5
Packaged Length23.2"
Packaged Width6.1"
Packaged Height2.4"

Click these tabs for additional compatibility information.

Replaces

Kubota:

K5182-71840, K5575-34330, K5575-97530, K5579-92330, K5579-92332

Compatible Models

Kubota:

ZG2048