Skip to main content

Genuine Oregon Mower Blade, 17-1/2"""" rpls TORO 112-9759 94-063

Oregon

$7.16
(No reviews yet) Write a Review
SKU:
OEP~94-063
UPC:
032488940639
Adding to cart… The item has been added

Details

  • Center hole: 5/8"
  • Enhanced mulching for bagging and discharge efficiency
  • Stays sharp and durable
  • Requires 3 blades for a 50" cut
  • Fits Toro Models: TimeCutter Z(5000,5020,5030,5040,5060)

Blades

Blade Width Measure near the center of the blade.2.25"
Blade Thickness Measure near the center of the blade.0.164"
Blade Length Measured diagonally from the corners of the blade17-1/2"
Center Hole Size Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD® built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut5/8"
OffSet (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table1/2"
Air Lift Air lift is the distance the lift panel rises above the cutting edge.15/16"

General

ColorBlack
Volume284.116 in3
Product UOMEach
Weight (with Packaging)1.762 Lb
Product Height0.164
Product Length17-1/2"
Product Width2.25
Packaged Length3.9"
Packaged Width23.5"
Packaged Height3.1"

Click these tabs for additional compatibility information.

Replaces

Stens:

350-219

Toro:

110-6837-03, 112-9759, 112-9759-03, 115-5059, 115-5059-03, 57-0250

Compatible Models

Toro:

117-5310, 74391, 74398, 74399, 74630, 74631, 74632, 74635, 74637, 74638, 74641, 79016, 79312, TimeCutter Z5000, TimeCutter Z5020, TimeCutter Z5030, TimeCutter Z5035, TimeCutter Z5040, TimeCutter Z5060