Skip to main content

Genuine Oregon Mower Blade, 20-7/8"""" rpls Exmark 108-0954 94-051

Oregon

MSRP: $14.42
$11.63
(You save $2.79 )
(No reviews yet) Write a Review
SKU:
OEP~94-051
UPC:
032488940516
Adding to cart… The item has been added

Details

  • Center hole: 7/16"
  • For walk-behind mowers
  • Enhanced mulching for bagging and discharge efficiency
  • Stays sharp and durable for longer
  • Replacement for major brand: Exmark

Blades

Blade Width Measure near the center of the blade.2.25"
Blade Thickness Measure near the center of the blade.0.149"
Blade Length Measured diagonally from the corners of the blade20-7/8"
Outer Hole Diameter This is the diameter of any holes to the sides of the center hole.3/8"
Center Hole Size Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD® built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut7/16"
Center-to-Center If there are outer holes; this is the distance between the centers of those outer holes.2-1/2"
OffSet (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table7/16"
Air Lift Air lift is the distance the lift panel rises above the cutting edge.7/8"

General

ColorBlack
Volume44.846 in3
Product UOMEach
Weight (with Packaging)1.66 Lb
Product Height0.149
Product Length20-13/16"
Product Width2.25
Packaged Length20.669"
Packaged Width2.205"
Packaged Height0.984"

Click these tabs for additional compatibility information.

Replaces

Exmark:

108-0954, 108-0954-03, 108-0954-S, 108-3762-03, 108-3762-03P, 108-3762-S

J Thomas:

TOR-5429

Laser:

91771

Lawn-Boy:

108-0954-03

Mowmore:

TO10928

Rotary:

10928

Stens:

345-429

Sunbelt:

B1SB10928

Toro:

108-0954, 108-0954-03, 108-3762-03, 108-3762-03P, 91-3106, 93-4106, 93-4106-03, 93-4106-03P

Compatible Models

Toro:

20030, 20033, 20036, 20037, 20038, 20039, 20040, 20042, 20043, 20044, 20045, 20046, 20048, 20053, 20054, 20055, 20056, 20057, 20058, 20062, 20090, 20090C, 20091, 20091C, 20092, 20092C, 20093, 20093C, 20095, 20095C, 20099, 20380, 20381, 20382, 20383, 20384, 20461, 20462, 20463, 20464, 20465, 20466, 20469, 20470, 20472, 20473, 20474, 20475, 20476, 20478, 20479, 20480, 20481, 20482, 20483, 20486, 20487, 20488, 20493, 20494, 20495, 20767, 20767B, 20768, 20768B, 20776, 20777, 20778, 20779, 20781, 20783, 20784, 20786, 20787, 20789, 20791, 20792, 20793, 20794, 20795, 20796, 20797, 22163, 22164, 22193, 22194, 22289, 22290, 22291, 22293, 22295, 22296, 22297, 22298, 59201, 59205