Genuine Oregon Mower Blade, 21-7/8"""" rpls BRIGGS 042225E701 97-015

Genuine Oregon Mower Blade, 21-7/8"""" rpls BRIGGS 042225E701 97-015

Oregon

MSRP: $15.55
$9.14
(You save $6.41 )
(No reviews yet) Write a Review
SKU:
OEP~97-015
UPC:
032488970155
Adding to cart… The item has been added

Details

  • Center hole: 3/8"
  • Requires 1 blade for 22" cut
  • High-lift: The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
  • Superior mulching for bagging and discharge efficiency
  • Enhanced hardening to keep the blade sharper and more durable
  • Replaces major brand: Murray

Blades

Blade Width Measure near the center of the blade.2.25"
Blade Thickness Measure near the center of the blade.0.134"
Blade Length Measured diagonally from the corners of the blade21-7/8"
Center Hole Size Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD® built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut3/8"
OffSet (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table3/8"
Air Lift Air lift is the distance the lift panel rises above the cutting edge.11/16"

General

ColorBlack
Volume237.889 in3
Product UOMEach
Weight (with Packaging)1.856 Lb
Product Height0.134
Product Length21-7/8"
Product Width2.25
Packaged Length23.6"
Packaged Width3.6"
Packaged Height2.8"

Click these tabs for additional compatibility information.

Replaces

Mowmore:

MU2013

Murray:

042225E701, 042225E701MA, 07113E701, 1101120E701, 1101120E701MA, 20046, 20046E701, 20046HT, 320046E701, 320046E701MA, 340696, 42225, 42225E701, 42225E701MA, 42225MA, 4225E701MA, 42786, 442225, 442225MA, 471499, 4714993, 4714993MA, 471499MA, 672059E701, 672735E701

Rotary:

2013

Stens:

335-778

Sunbelt:

B1MU2601

Compatible Models

Murray:

220010x194A, 220010x194NA, 220010x92A, 220010x92NA, 220011x92A, 220012x92A, 220092x92B, 221010x31A, 221010x99A, 221010x99B, 22105A, 22105B, 22105x30A, 22105x30B, 22105x78A, 22105x92A, 22105x92B, 22106A, 22106B, 22106x82B, 22106x9A, 22107A, 22107B, 22107C, 22107D, 22107E, 22107x71A, 22115x194A, 22115x194B, 22115x92A, 22115x92B, 22116x92A, 22117x192A, 22117x194A, 22117x194B, 22117x194C, 22117x92A, 22117x92B, 22117x92C, 22211E, 22211G, 22213A, 22223x41A, 22255D, 22255E, 22255x18B, 22255x30A, 22255x31A, 22255x7C, 22255x7D, 22256A, 22266x83A, 22266x92A, 22266x92B, 22267x18B, 224010x24A, 224010x24B, 224010x48A, 224010x48B, 22405A, 22405x32A, 22405x78A, 22405x8A, 22406B, 22408x71A, 225010x99A, 22505x82B, 22506B, 22507x92A, 22508A, 22508x6A, 225112x92C, 22515x92A, 22516x194A, 22516x94A, 22526x194A, 22545A, 22545D, 22545E, 22545x92D, 22545x92E, 22547C, 22547D, 22548A, 22635D, 22635E, 22755x4A, 22755x4B, 22755x50A, 22755x50B, 22755x92A, 22755x92B, 22757x18A, 22757x18B