Genuine Oregon Mower Blade, 25"""" rpls Country Clipper H-2397 91-544

Oregon

MSRP: $25.89
$15.98
(You save $9.91 )
(No reviews yet) Write a Review
SKU:
OEP~91-544
UPC:
032488915446
Adding to cart… The item has been added

Details

  • Center hole: 1/2"
  • Requires 2 blades for 48" cut
  • Requires 3 blades for 72" cut
  • low-lift
  • Replacement for major brands: Bush hog, Grasshopper, Country Clipper

Blades

Blade Width Measure near the center of the blade.2.50"
Blade Thickness Measure near the center of the blade.0.250"
Blade Length Measured diagonally from the corners of the blade25"
Center Hole Size Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD® built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut1/2"
OffSet (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table5/16"
Air Lift Air lift is the distance the lift panel rises above the cutting edge.3/4"

General

ColorBlack
Volume407.192 in3
Product UOMEach
Weight (with Packaging)4.226 Lb
Product Height0.25
Product Length25"
Product Width2.5
Packaged Length4.2"
Packaged Width27.7"
Packaged Height3.5"

Click these tabs for additional compatibility information.

Replaces

Bush Hog:

88773

Country Clipper:

H-2397, H-2459, H-2501, H2397, H2459, H2501

Grasshopper:

320250, 320251, 320252, 320253, 320254, 320255, 320323

J Thomas:

GR-6403

Mowmore:

GH6402

Prime Line:

7-06493

Rotary:

6402

Stens:

320-026

Sunbelt:

B1SB6402

Compatible Models

Bush Hog:

ATH, ATH600, ATH720, FTH, FTH480, FTH600, FTH720

Country Clipper:

Boss, SR1220, SR1220L