Details
- Center hole: 7/16"
- Aggressive blade angle increases air flow to push debris up and out for superior bagging or side discharge.
- Gator Mulcher® provides cleaner, more efficient cutting performance can eliminate the need to bag, saving time and hassle.
- Will not fit blade brake clutch equipped mowers
- Replaces major brand: Toro
Blades
| Blade Width
Measure near the center of the blade. | 2.25" |
| Blade Thickness
Measure near the center of the blade. | 0.134" |
| Blade Length
Measured diagonally from the corners of the blade | 20-15/16" |
| Outer Hole Diameter
This is the diameter of any holes to the sides of the center hole. | 3/8" |
| Center Hole Size
Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD® built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut | 7/16" |
| Center-to-Center
If there are outer holes; this is the distance between the centers of those outer holes. | 2-7/16" |
| OffSet
(Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table | 5/16" |
| Air Lift
Air lift is the distance the lift panel rises above the cutting edge. | 3/4" |
| Gator Blade Series | Gator® G3™ |
General
| Color | Black |
| Product UOM | Each |
| Weight (with Packaging) | 2.273 Lb |
| Product Height | 0.134 |
| Product Length | 20-15/16" |
| Product Width | 2.25 |
Replaces
J Thomas:
BO-900Laser:
91544Mowmore:
MB6308Rotary:
6308Stens:
302-284Toro:
14-1659, 62-7700, 62-7700-03, 62-7700-03P, 75-9420, 91-2256, 91-2256-03, 91-2256-03-PLT, 91-2256-03P
