Genuine Oregon Mulching Blade, Gator G6 , 20-15/16"""" rpls Hustler 782516 396-703

Oregon

MSRP: $30.02
$17.75
(You save $12.27 )
(No reviews yet) Write a Review
SKU:
OEP~396-703
UPC:
5400182999706
Adding to cart… The item has been added

Details

  • Center hole: 5/8"
  • Tungsten carbide is “fused” into the blade – creating an ultra-hard layer at the cutting edge and increasing the time between sharpening.
  • Greater width and thickness extends blade life and allows for longer lifting arch to improve bagging and mulching.
  • The aggressive blade angle increases air flow to push debris up-and-out for superior bagging or side discharge.
  • Gator Mulcher® provides cleaner, more efficient cutting performance can eliminate the need to bag, saving time and hassle.
  • X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution.
  • Replaces major brands: Land Pride and Hustler

Blades

Blade Width Measure near the center of the blade.3.00"
Blade Thickness Measure near the center of the blade.0.250"
Blade Length Measured diagonally from the corners of the blade20-15/16"
Center Hole Size Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD® built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut5/8"
OffSet (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table5/8"
Air Lift Air lift is the distance the lift panel rises above the cutting edge.1"
Gator Blade SeriesGator® G6™

General

ColorBlack
Product UOMEach
Weight (with Packaging)3.9 Lb
Product Height0.25
Product Length20-15/16"
Product Width3

Replaces

Hustler:

782516, 782516X

Land Pride:

839-179C, 839-181C