Oregon Mulching Blade, Gator G3 , 21-15/16"""" rpls Ariens 01584500 92-602

Oregon

MSRP: $26.65
$15.75
(You save $10.90 )
(No reviews yet) Write a Review
SKU:
OEP~92-602
UPC:
032488926022

Details

  • Center hole: 3/4"
  • Aggressive blade angle increases air flow to push debris up and out for superior bagging or side discharge
  • Gator Mulcher® provides cleaner, more efficient cutting performance can eliminate the need to bag, saving time and hassle.
  • Replaces major brands: Gravely and Ariens

Blades

Blade Width Measure near the center of the blade.2.50"
Blade Thickness Measure near the center of the blade.0.203"
Blade Length Measured diagonally from the corners of the blade21-15/16"
Center Hole Size Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD® built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut3/4"
OffSet (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table1/2"
Air Lift Air lift is the distance the lift panel rises above the cutting edge.3/4"
Gator Blade SeriesGator® G3™

General

ColorBlack
Volume402.404 in3
Product UOMEach
Weight (with Packaging)2.973 Lb
Product Height0.203
Product Length21-15/16"
Product Width2.5
Packaged Length6.6"
Packaged Width23.45"
Packaged Height2.6"

Click these tabs for additional compatibility information.

Replaces

Ariens:

01584500, 1584500

Gravely:

01584500

Compatible Models

Ariens:

815008, 836009, 915013 (EZR 1742), 915022 (EZR 1842), 915308 (EZR 1742), 936032 (YT1742), 936033 (YT1542), 936035 (YT1742), 936320 (YT1742H), 936330 (YT1742)