Genuine Oregon Mower Blade, 16-1/2"""" rpls BRIGGS 19733 99-120

Oregon

MSRP: $17.59
$10.45
(You save $7.14 )
(No reviews yet) Write a Review
SKU:
OEP~99-120
UPC:
032488991204
Adding to cart… The item has been added

Details

  • Center hole: 3/8"
  • Requires 3 blades for 48" cut
  • Superior mulching for bagging and discharge efficiency
  • Enhanced hardening to keep the blade sharper and more durable
  • Replaces major brand: Snapper

Blades

Blade Width Measure near the center of the blade.2.75"
Blade Thickness Measure near the center of the blade.0.164"
Blade Length Measured diagonally from the corners of the blade16-1/2"
Center Hole Size Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD® built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut3/8"
OffSet (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table1/4"
Air Lift Air lift is the distance the lift panel rises above the cutting edge.7/8"

General

ColorRed
Volume368.876 in3
Product UOMEach
Weight (with Packaging)2.002 Lb
Product Height0.164
Product Length16-1/2"
Product Width2.75
Packaged Length22.7"
Packaged Width6.5"
Packaged Height2.5"

Click these tabs for additional compatibility information.

Replaces

Mowmore:

SN16

PLP:

115-018

Rotary:

2169

Snapper:

1-9733, 19733, 7019733, 7019733BMA, 7019733BMYP, 7019733BZ, 7019733BZYP

Stens:

320-994

Sunbelt:

B1SN3008

Compatible Models

Snapper:

GT180H484K, GT180H485K, HT18480, LT12482, LT12502, LT16001, LT16002, LT160H482BV, LT16482, YT16483, YT16D484B, YT16D484K, YT180H484K