Genuine Oregon Mower Blade, 20-11/16"""" rpls BRIGGS 17002 99-103

Genuine Oregon Mower Blade, 20-11/16"""" rpls BRIGGS 17002 99-103

Oregon

MSRP: $19.32
$13.93
(You save $5.39 )
(No reviews yet) Write a Review
SKU:
OEP~99-103
UPC:
032488991037
Adding to cart… The item has been added

Details

  • Center hole: 3/8"
  • For walk-behind, steel deck mowers
  • Enhanced mulching for bagging and discharge efficiency
  • Stays sharp and durable for longer
  • Replacement for major brand: Snapper

Blades

Blade Width Measure near the center of the blade.2.75"
Blade Thickness Measure near the center of the blade.0.164"
Blade Length Measured diagonally from the corners of the blade20-11/16"
Outer Hole Diameter This is the diameter of any holes to the sides of the center hole.3/8"
Center Hole Size Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD® built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut3/8"
Center-to-Center If there are outer holes; this is the distance between the centers of those outer holes.2-3/4"
OffSet (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table3/16"
Air Lift Air lift is the distance the lift panel rises above the cutting edge.1"

General

ColorBlack
Volume421.314 in3
Product UOMEach
Weight (with Packaging)2.572 Lb
Product Height0.164
Product Length20-11/16"
Product Width2.75
Packaged Length22.7"
Packaged Width6.4"
Packaged Height2.9"

Click these tabs for additional compatibility information.

Replaces

J Thomas:

SN-20NEW

Mowmore:

SN21SD

PLP:

115-004

Prime Line:

7-06728

Rotary:

2006

Snapper:

1-7002, 1-9645, 1-9702, 1-9710, 17002, 17168, 19795, 2-6691, 26691, 7017002, 7017086, 7017168, 7019645, 7019702, 7019710, 7019795BMA, 7019795BZ, 7019795BZYP, 7019795YP, 7026407, 7026407AYP, 7026691, 7026691BZYP, 7026691YP, 702669BMA, 702669BZ, 702669YP, 7028524, 7041939, 7041939BMA, 7041939BZ, 7041939BZYP

Stens:

335-356

Sunbelt:

B1SN3006

Compatible Models

Snapper:

21351, 21351D, 21351P, 21351PD, 21351PS, 21351S, 21355, 21355D, 21355P, 21355PD, 2135XPS, 2135XPST, 2135YP, 21401, 21401D-2, 21401P, 21401PD, 21401PD-2, 21401PS, 21401S, 21402, 21402P, 21402PT, 21402T, 21404B, 21404PB, 21404PT-2, 21404T-2, 21405, 21405-2, 21405D-2, 21405P, 21405P-2, 21405PD, 21405PD-2, 21405PDT, 21405PN, 21405PS, 21405PT, 21405T, 2140Y, 2140YP, 214X1, 214X1P, 214X1PR, 214X1PR-2, 214X1PS, 214X1R, 214X1R-2, 214X1S, 214X2PR, 214X2PR-2, 214X4PR, 214X4PR-2, 214X5, 214X5-2, 214X5P, 214X5P-2, 214X5PR, 214X5PR-2, 214X5PS, 214X5R, 214X5R-2, 214Y1PT, 21500, 21500T2, 21501, 215012, 215014, 215015, 21509B, 21509T2, 216015, 216515BV, 216517B, 216518B, 2167517BV, 2167519B, 2167519BFC, 2167520B, 2167520BFC, 217020B, 2172520B, 2187520, 21RX1, 21RX1P, 421613BVE1, 421614BVE, 421615BVE, 421615TVE, 421616BVE, 421618BVE, 421620BVE, 421622BVE, 421823BVE, 422023BVE, 7063023, A21509B, CP215520HV, P2187520, P2187520E