Genuine Oregon Mulching Blade, 16-1/4"""" rpls Exmark 103-6381 92-026

Genuine Oregon Mulching Blade, 16-1/4"""" rpls Exmark 103-6381 92-026

Oregon

MSRP: $18.12
$10.51
(You save $7.61 )
(No reviews yet) Write a Review
SKU:
OEP~92-026
UPC:
032488920266
Adding to cart… The item has been added

Details

  • Center hole: 15/16"
  • X-Tended Cutting Length™ optimizes the cutting efficiency with each revolution
  • Enhanced mulching for bagging and discharge efficiency
  • Stays sharp and durable
  • Replacement for major brand: Toro

Blades

Blade Width Measure near the center of the blade.2.50"
Blade Thickness Measure near the center of the blade.0.203"
Blade Length Measured diagonally from the corners of the blade16-1/4"
Center Hole Size Many blades will have a round hole in the center of the blade and you will need to know its diameter. Blade Length 5 or 7 Point Star Center holes may be 5 or 7 point star shaped. 5 point star on blade7 point star on blade Square or Rectangular The MTD built blades on many walk behind lawn mowers have a 'bow-tie' hole. In this case the Oregon replacement blade will have a rectangular center hole which will fit on the bow-tie pattern on the blade adapter. Square or Rectangular hole on blade MTD Blades The MTD® built blades (Bolens, Cub Cadet, Troy-bilt, White, Yard Machine, and Yardman) may have a 6 point star. Oregon replacement blades will have a 'Y' shaped center hole which will fit exactly on the 6 point star on the blade spindle. 6 point star for MTD blades The two sizes of the 6 point star. If your blade spindle has a bolt and lock washer that holds the blade to the machine you would use the 11/16" star or 'Y' blade. blade spindle with bolt and lock washer. If your blade is secured with a large flange nut then you would use the 5/8" star or 'Y' blade. blade spindle with large flange nut15/16"
OffSet (Sometimes referred to as offset): If you set the blade on a table this is the distance the center of the blade is above the table top (if any) when the cutting edges are flat on the table0
Air Lift Air lift is the distance the lift panel rises above the cutting edge.1"

General

ColorBlack
Volume331.201 in3
Product UOMEach
Weight (with Packaging)2.117 Lb
Product Height0.203
Product Length16-1/4"
Product Width2.5
Packaged Length23"
Packaged Width6"
Packaged Height2.4"

Click these tabs for additional compatibility information.

Replaces

Exmark:

103-6381, 103-6381-S, 103-6391, 103-6391-S, 103-6396, 103-6396-S, 103-6401, 103-6401-S, 116-5177, 116-5177-S

Mowmore:

EX11240

Rotary:

11240

Sunbelt:

B1EM1890

Toro:

109-6872

Compatible Models

Exmark:

LZE20KA484, LZE22KA484, LZE600GKA484A2, LZE600KA484, LZE651GKA484A2, LZS22KA484, LZS22KA484CA, LZS651CKA484A2, LZS651KA484, LZS651KA484CA, LZX23KC486, LZX680KC486, Lazer Z AS, Lazer Z CT, Lazer Z HP, Metro HP, Next Lazer ASX, Next Lazer Z Air Cooled, PNE651GKA48200, PNE710GKC48200, PNS22KA483, PNS651KA483, PNS710GKC48300, PNS710GKC483A4, PNS710KC483, RAE708GEM48300, RAE720CKC48300, RAS710CKC48300, RAX651GKA484A3, TTS16KA483, TTS16KA483CA, TTS20KAE483, TTS20KAE483CA, TTS20PKAE483, TTS481GKA48300, TTS481KA483, TTS541CKA48300, TTS541KA483CA, TTS600GKA483E0, TTS600KAE483, TTS600PKAE483, TTS680PKC48300, TTS680PKC483E0, TTS680PKCE483, Turf Tracer HP, VT20KA484, VT24KA484, VT24KA484CA, VT651KA484, VT691KA484CA, VTS651KA484, VTS651KA484CA, VTS691CKA48400, VTS691KA484CA, VTX651GKA48400, VTX651KA484, Vantage

Toro:

Titan