Skip to main content

KOHLER ENGINE MODEL AND SPEC # PA-CV173-3002 ARKETING BASIC

Kohler

MSRP: $428.96
$396.94
(You save $32.02 )
(No reviews yet) Write a Review
SKU:
KOH~PA-CV173-3002
UPC:
DOES NOT APPLY
Adding to cart… The item has been added

Picture is stock kohler picture of engine series.

Before macking purchase

  You must contact us with themodel and spec of your engine ot make sure this is correct replacement for you.

 

 

COMMAND PRO CV173

Our all-new Command PRO models are the ultimate engines for commercial walk-behind mowers.

Features

  • Torque output: 7.75 ft-lbs
  • 3-year limited commercial warranty
  • Enjoy effortless starts thanks to our Easy-Pull™ technology
  • Easy pours and less spilling with Accu-Fill® fuel tank's 45% larger angled fuel neck
  • Consistent-Cut™ technology maintains engine speed for a cleaner turf cut, even in tall, wet grass
    • Cast-iron cylinder liners add durability and engine protection
Engine Type

Four-cycle, gasoline, OHV, cast iron cylinder bore, aluminum block

ModelCommand PRO CV173
Displacementmm3 (in3)173 (10.6)
Boremm (in)70 (2.8)
Strokemm (in)45 (1.8)
Gross Torque[1]Nm (lb-ft)10.5 (7.75)
Compression Ratio8.0:1
Dry Weightkg (lbs)16.4 (36.2)
Oil CapacityL (US qt)0.59 (0.625)
LubricationDual - Full Pressure & Splash
Dimensions LxWxHmm (in)434 x 353 x 281
(17.1 x 13.9 x 11.1)
Backpressure Limit[2]40
Emissions Compliance
  • EPA Phase III
  • CARB Phase III
  • EU Stage V
  • China Phase II
Engine TypeCommercial

Length is front of blower housing to back of blower housing. Width is air cleaner cover to muffler guard. Height is mounting surface to grass screen.

 

1 Power (hp) and Torque (ft lbs) specifications for Kohler general purpose engines are rated pursuant to Society of Automotive Engineers (SAE) J1940 based on gross output testing performed according to SAE J1995 without the air cleaner and muffler. Actual engine power and torque are lower and affected by accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed, ambient operating conditions (temperature, humidity and altitude) and other factors. This J1940 / J1995 rating provides consistent measurement to customers who may want to control the intake and exhaust features of the engine. For more information, contact Kohler Co. Engine Engineering Department. Kohler Co. reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligation.


2 Inches of H20 @ 3600 RPM WOT


3 J1995 power and torque certified by 3rd Party Witness