Skip to main content

KOHLER ENGINE MODEL AND SPEC # PA-KT730-3051 RIENS

Kohler

MSRP: $2,108.35
$1,995.88
(You save $112.47 )
(No reviews yet) Write a Review
SKU:
KOH~PA-KT730-3051
UPC:
8.86E+11

Picture is stock kohler picture of engine series.

Before macking purchase

  You must contact us with themodel and spec of your engine ot make sure this is correct replacement for you.

 

 

7000 SERIES KT730

Professional features and durablity in a consumer package.

Based on the KOHLER Command PRO® commercial engine design, the air-cooled, V-time 7000 Series will run rings around your neighbors. It features a 3 year, unlimited hour, limited warranty.

Features

  • PRO Performance filtration package increases air, oil and fuel filter capacity for extra protection
  • Pressure lubrication extends engine life by keeping critical components well lubricated
  • Starts hot or cold, even at temperatures below freezing, with Smart-Choke™ technology
  • No need to choke the engine - starts at any throttle position
    • Cleaner cuts - Consistent-Cut™ technology maintains engine speed even in tough mowing conditions
Engine Type

Four-cycle, twin-cylinder, air-cooled, vertical shaft, gasoline, OHV, with cast iron liner.

ModelKT730
Power[1]kw (hp)17.2(23)
Displacementmm3 (in3)725 (44.2)
Boremm (in)83 (3.3)
Strokemm (in)67 (2.6)
Gross Torque[1]Nm (lb-ft)54.9 (40.5)
Compression Ratio9.1:1
Dry Weightkg (lbs)38.6 (85)
Oil CapacityL (US qt)1.9 (2)
LubricationPressure lubrication w/full flow filter
Dimensions LxWxHmm (in)473 x 445 x 354
(18.6 x 17.5 x 13.9)
Backpressure Limit[2]50
Certified Power[3]kw (hp)16.3 (21.9)
Certified rpmrpm3600
Emissions Compliance
  • EPA Phase III
  • EU Stage V
  • CARB Phase III
  • China Phase II
Engine TypeConsumer

Length is front of air cleaner cover to back of blower housing. Width is side to side. Height is mounting surface to grass screen or air filter.

 

1 Power (hp) and Torque (ft lbs) specifications for Kohler general purpose engines are rated pursuant to Society of Automotive Engineers (SAE) J1940 based on gross output testing performed according to SAE J1995 without the air cleaner and muffler. Actual engine power and torque are lower and affected by accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed, ambient operating conditions (temperature, humidity and altitude) and other factors. This J1940 / J1995 rating provides consistent measurement to customers who may want to control the intake and exhaust features of the engine. For more information, contact Kohler Co. Engine Engineering Department. Kohler Co. reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligation.


2 Inches of H20 @ 3600 RPM WOT


3 J1995 power and torque certified by 3rd Party Witness